Leave Your Message
Auto Darkening Welding Helmet WH7-WS80

Welding Helmet

Auto Darkening Welding Helmet WH7-WS80

This welding helmet incorporates our finest Smart shade, Tack Mode, Step Delay, and Shade Lock technologies along with our independent 6th Generation chips to offer users the ultimate welding experience and protection.

  • ADF MODEL WS80
  • Optical Class 1/1/1/1
  • Viewing Area 100mm x 82mm / 3.94" x 3.23"
  • Cartridge Size 133mm x 114mm x 7mm/5.24" x 4.5" x 0.28"

introduction and advantage

Welding helmet Smart-shade Features introduction and advantage

Typically, before starting a welding operation, the welder must adjust the shading based on factors such as the welding material, scene, and current. The automatic shading function uses advanced technology to preset and simulate various welding environments, automatically identify different welding conditions and adjust to appropriate working shading. This results in: Best for beginners: the welding helmet Auto darkening filter shade will automatically adjust according to the brightness of the arc, eliminating the need for manual adjustment, achieving true fully automatic welding. 

Highest comfort and eye protection: The welding helmet Auto darkening filter band pass changes synchronously with the welding arc, ensuring that the eyes cannot detect the fluctuations of the welding arc.

Welding helmet Step Delay Features introduction and advantage

When welding, the automatic darkening filter (ADF) is usually set to dark state 13, 14 or dark state 10, 11 to protect the welder's eyes from the strong welding arc. After the welding is completed and the welding arc disappears, the ordinary ADF lampshade quickly changes from dark state to light state within 0.1 to 1 second, making it difficult for the eyes to adjust from dark to light quickly, causing discomfort. The step delay function effectively solves this problem.  ADF does not transition from dark to bright state immediately after welding, but switches to Hue 5 first and then to bright state, allowing the eyes to gradually adapt and providing a more comfortable experience.

Welding helmet Tack Mode Features introduction and advantage

Typically, during spot welding, the welding arc alternates rapidly between dark and light states, causing the ADF filter to switch frequently between these states. This rapid switching can be discomforting for the eyes. The Tack Mode function provides a solution by setting Shade 5 as the transition shade. When the spot welding arc disappears, the ADF does not immediately switch to the light state; instead, it transitions to shade 5. This gradual change reduces eye discomfort caused by sudden shifts in brightness and darkness while ensuring clear visibility during welding tasks.

Welding helmet Shade Lock Features introduction and advantage

In certain welding settings, the ADF may be rendered ineffective due to limitations in the sensor's detection range or angle, preventing it from detecting the welding arc. In such cases, utilizing standard ADFs may not be a viable solution, leading workers to resort to using mineral glasses, adding complexity and inconvenience to their tasks. To address this challenge, the Shade Lock function has been developed. When operating in environments where the sensor cannot detect the welding arc, welders can engage this feature to set a suitable shade, effectively transforming the ADF into a mineral glass substitute. Once the work is completed, the ADF can easily revert back to its original function. Additionally, individuals requiring a fixed shade for specific tasks can also make use of this functionality.

657ae14bww

Technical Parameter

ADF MODEL

WS80

Optical Class

1/1/1/1

Viewing Area

100mm x 82mm / 3.94" x 3.23"

Cartridge Size

133mm x 114mm x 7mm/5.24" x 4.5" x 0.28"

UV/IR Protection

Permanent Shade DIN 14

Light State

Shade DIN 3

Dark State

DIGITAL5-8/9-14, AUTO 5-14

Sensors

4(IR)+2(LIGHT)

Grinding

Shade DIN 3

Sensitivity Control

DIGITAL(1-6)

Reaction Time (swithing time)

0.0003 sec

Delay Control (Time from dark to light)

0.1-0.9s/2-step/Tack mode

Digital Display

YES

Battery Type

1 x CR 2450( Replaceable) Storing:>3 Years/Standby:8000~20000 Hours/Working:2000~3000 Hours

Solar Cell

Yes

Power On/Off

Fully Automatic

TIG Rating

2Amp

Standard

EN379 CE/ANSI Z87.1/CSA Z94.21